Magazine cover design: size, layout and print file setup
A magazine cover design starts with the trim size the printer will cut, often 8.375 x 10.875 inches or US Letter in the US and A4 in Europe. Add 0.125 inch (3 mm) bleed, keep type 0.25 inch inside the trim, and build a clear hierarchy: masthead, one main image, a lead cover line, then smaller lines.
What size is a magazine cover?
The cover is the same size as the inside pages, so the cover size is the magazine's trim size. Pick it with your printer before you open a design file, because every margin and pixel count follows from it.
Common trim sizes listed on Mixam's magazine page:
- 8.375 x 10.875 in (listed there as 8.38 x 10.88 in): a common size for US magazines
- US Letter, 8.5 x 11 in: the simplest choice for self-published and company magazines
- A4, 210 x 297 mm (8.3 x 11.7 in): the standard in Europe and most of the world
- Executive, 7 x 10 in, and 8 x 10 in: smaller, more book-like formats
- Digest, 5.5 x 8.5 in: pocket-size titles and zines
The cover of a saddle-stitched (stapled) magazine is a single page. A perfect-bound magazine has a spine, so its cover file is one spread with the back cover, the spine and the front cover side by side.
How many pixels is a magazine cover at 300 dpi?
Multiply each side in inches by 300. An 8.375 x 10.875 in cover is 2,513 x 3,263 px at the trim, and 2,588 x 3,338 px with 0.125 in bleed on every side. Photos on the cover need that resolution at the printed size.
- 8.375 x 10.875 in: 2,513 x 3,263 px; with bleed (8.625 x 11.125 in) 2,588 x 3,338 px
- Letter, 8.5 x 11 in: 2,550 x 3,300 px; with bleed (8.75 x 11.25 in) 2,625 x 3,375 px
- A4, 210 x 297 mm: 2,480 x 3,508 px; with 3 mm bleed (216 x 303 mm) 2,551 x 3,579 px
- Digest, 5.5 x 8.5 in: 1,650 x 2,550 px; with bleed (5.75 x 8.75 in) 1,725 x 2,625 px
Mixam asks for the cover spread as a single 300 dpi PDF. A smaller cover photo looks soft in print even when it looks sharp on screen.
How much bleed and margin does a magazine cover need?
Use 0.125 inch of bleed outside the trim on every edge (3 mm for metric sizes) and keep text at least 0.25 inch inside the trim. The cover photo or background color must run all the way into the bleed.
Mixam's bleed guide explains why: presses and cutters move slightly, so without bleed a thin white edge can appear after trimming. The same page calls the inner safe zone the quiet area and gives 0.25 inch as its minimum. The UK version of the guide uses 3 mm bleed, so an A4 page is set up at 216 x 303 mm.
On a perfect-bound cover, the spine also needs bleed at the top and bottom edges. Keep spine text short: its width depends on the page count and paper.
What goes on a magazine cover?
A newsstand cover has five parts: the masthead (the title), the main image, the main cover line, secondary cover lines, and the dateline with issue number and price area. The industry calls the front cover "cover 1", the inside front "cover 2", the inside back "cover 3" and the back "cover 4".
- Masthead: the title, the same position on every issue, usually across the top so it shows when copies overlap on a rack.
- Main image: one photo or illustration that carries the issue.
- Main cover line: the lead story in the biggest type after the masthead.
- Secondary cover lines: two to five shorter lines, mostly on the left third, which is the part still visible when covers are fanned out.
- Dateline, issue number and barcode area: small, but reserve their space from the start so a late barcode does not push a cover line.
How do I make a magazine cover design that works?
Design for two sizes at once: the printed cover at arm's length and a small thumbnail on a phone. If the masthead and the main line still read as a thumbnail, the hierarchy is right.
- Set up the document at the trim size with bleed and margin guides, in InDesign, Affinity Publisher or Figma.
- Place the masthead first and lock it. It is the one element readers recognize issue to issue.
- Crop the main image so the subject's eyes sit near the upper third and do not collide with the masthead, or let the head overlap the title on purpose.
- Limit the cover to two typefaces and three or four type sizes. Contrast between sizes does more than extra colors.
- Check every cover line against the image underneath it. Light type on a busy photo needs a darker area or a shadow.
- Export a print-ready PDF in CMYK with bleed, the format Mixam's file setup guide asks for, and look at it at 100% zoom before uploading.
How do I show a magazine cover to a client?
Put the cover on a magazine mockup at its real proportions before you send it. A flat PDF hides what a printed copy shows: a cover line too close to the trim or a masthead lost on a light photo.
Our magazine mockups come as PSD files and can also be edited online in US, EU and square formats. In the mockup generator you drop the cover into a scene in a browser tab and export a PNG, with nothing to install; the first mockup guide walks through it. If you work in Photoshop, how to use a PSD mockup covers placing art in the smart object. For print sizes beyond magazines, see what size to design a poster, and our explainer on what a mockup is covers the other uses.
Magazine cover mockup examples
- Magazine mockup, US portrait, scene 08: a closed magazine with the cover corner turning, for a front cover shown whole.
- Magazine mockup, US landscape, scene 09: an open issue with a page mid-turn, for a cover plus the opening spread.
- Magazine mockup, square, scene 09: two square issues, one with a curled corner, for art and photo titles.
- Free floating magazine mockup: a magazine in the air with a lifting page, a free PSD for quick previews.
- Luiro, US, scene 05: an open booklet leaning on dark concrete, for a moody editorial look.
- Oisin, EU, scene 17: an open issue with a lilac cover on a stone floor, for inside spreads.
FAQ
What is the standard magazine size?
In the US, 8.375 x 10.875 inches and US Letter (8.5 x 11 inches) are the most common. In Europe it is A4, 210 x 297 mm. Always confirm the trim with your printer first.
What is the cover page of a magazine called?
The front cover is called "cover 1" in print production. The title across its top is the masthead, and the headlines on it are cover lines.
What resolution should a magazine cover be?
300 dpi at the printed size. For an 8.5 x 11 inch cover with bleed that is 2,625 x 3,375 px.
What makes a good magazine cover?
One strong image, a masthead that stays readable on it, one lead cover line, and a hierarchy that still reads as a small thumbnail.
Can I design a magazine cover in Canva or Figma?
Yes. Set the page to the trim size plus bleed, keep text inside the margin, use images at 300 dpi for the printed size, and export a PDF. Ask your printer whether they need CMYK; Figma exports RGB only.


